Publication

The oil film thickness was measured under conditions of minute vibrations using an elastohydrodynamic lubrication (EHL) ball-on-disk test rig. Poly-alpha-olefin (PAO) oil was used as the lubricant under conditions of pure sliding where only the ball specimen was minutely vibrated. It was found that an oil film formed when the amplitude ratio was greater than 1.6. Moreover, when conditions were changed to the maximum vibrating speed, oil viscosity, and maximum contact pressure, the critical amplitude ratio at which the oil film began to form remained at 1.6. Consequently, calculated results showed that the oil film was formed when the amplitude ratio was π/2 (nearly equal to 1.6), which closely agreed with our test results.